Audio Technica AT-VM95 E pick-upelement

Artikelnummer: Audio Technica AT-VM95 E - Tonar 9644
Artikel 8 van 54
€ 59,00 (inclusief btw)

AT-VM95E (inclusief 2 montageschroefjes)

VM95 series Elliptical stereo cartridge

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

No use of nuts

VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Specifications

Cartridge & Stylus
Frequentierespons20 - 22,000 Hz
Kanaalscheiding20 dB (1 kHz)
Verticale trackinghoek23°
Vertical Tracking Force1.8 to 2.2g (2.0g standard)
NaaldconstructieBonded Round Shank
Aanbevolen ladingsimpedantie47,000 Ω
Spoelimpedantie3.3 kΩ (1 kHz)
Gelijkstroomweerstand485 Ω
Spoelinductantie550 mH (1 kHz)
Uitgangsspanning4.0 mV (@ 1 kHz, 5 cm/sec)
Balans uitgangskanaal2.0 dB (1 kHz)
NaaldvormElliptical
CantileverAluminium Pipe
Statische compliantie17 x 10 – 6 cm / dyne
Dynamische compliantie7 x 10 – 6 cm / dyne (100 Hz)
Bevestiging1/2” centres
Elementgewicht6.1g
Afmetingen17.2 x 18.9 x 28.3 ( H x W x D mm)
Meegeleverde accessoiresTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
ModelAT-VM95E
Aanbevolen ladingscapaciteit100-200 pF
VervangingsnaaldAT-VMN95E
Naaldgrootte0.3 x 0.7 mil
SoortVM Stereo Dual Magnet
SpoeldraadT.P. Copper

Winkelwagen

Geen artikelen in winkelwagen.

Nieuwsbrief

Meld u aan voor onze nieuwsbrief
Aanmelden
© 2011 - 2024 Pickupnaaldenshop | sitemap | rss | webwinkel beginnen - powered by Mijnwebwinkel